Demand For Plastics Is Raising Up

The plastics industry  is expected to recover in 2010 after assessment of the Plastics Industry Ministry slightly. The turnaround was marked accordingly as early as from the second half of 2009 and was boosted by the increasing international demand and the economic stimulus packages launched in Thailand significantly. Specific growth forecasts for sales or production of the overall sector, however, neither the association nor get in official institutions.

Conclusions on the development of the industry can be drawn, therefore, primarily of the company sales and foreign trade statistics. For the full year 2009 decreased. Imports of plastic products, according to the Commerce Department by 15.1% to 2.1 billion. In the years before the industry had attracted a steady imports, with the growth rates 6-10% move. Approximately 37.6% of imports of plastics in 2009 accounted for films, foils and strips, as well as tubes and pipes (4.2%). The main source countries for Japan, China, Malaysia and the U.S.. Given the general upturn in imports, which in the first Half of 2010 by more than 50% compared with the same period last year were likely to explode, so do the imports of plastics relatively quickly recover.

The development of exports in 2009 was down. With $ 2.3 billion, exports of plastics were up 14.4% on the result of the previous year. Since 2004, the industry exports were still up significantly, and sometimes realize growth rates of 20%. The three main export items in 2009 set from films, foils and strips (32.1%), shopping bags (22.7%) and utensils (4.5% together). The biggest buyers of Thai plastic products were, according to the Commerce Department, the U.S., Indonesia and Australia. The mirror in the past compared with the import side, higher growth rates of plastics exports reflects the increasing international competitiveness of Thai industry companies.

Of a recovery in the future speak for assessment of the Government Institution Office of Industrial Economics (OIE) that the local main sectors for plastic products such as the automotive and electronics industry, the production of hard disks, the food and the packaging industry and construction in 2010 in some cases very high growth rates. In addition, affect the international economy, initiated in 2009 packages remain positive on the external demand for Thai products. Cross-exports to Thailand in 2010 by nearly 20% show up, which should also increase the demand of the highly export-plastics industry.

A good example is the development of the sector enterprises T. Krungthai Industries Plc (TKT), which mainly supplies the automotive and electronics industry with primary products. The plastics manufacturer was already in the first Quarter of 2010 achieved a new record and shows to follow media reports convinced that it can be for the full year growth target exceeded by 15% significantly. The Deputy Managing Director, Choompol Techakrisri projected in the Bangkok Post that the company\'s 2010 sales could due to the dynamic development of the Thai automotive sector as much as 30-40% in the skyrocketing. The production of the Thai vehicle was forging risen sharply in the first months of 2010 by almost 100%.

As a further driving force turns out to be for the Thai plastics sector is increasingly the establishment of the FTA AFTA (ASEAN Free Trade Area), which has taken on 1.1.10 with the drastic reduction of intra-regional tariffs to a new stage of development. Companies like Srithai Superware Plc, the largest melamine producer in Thailand to go, so even a "golden year off". The company\'s sales of packaging materials for food and drink sector to double over therefore 2010th To keep step with the rapid development and generate further economies of scale to be able to press reports, Srithai ordered to follow new technology from Europe.

In addition, the company plans to invest because of the increasing demand from the food sector in the expansion of capacity. Is planning Srithai, 650 million baht (B, around 13.5 million €, 1 € = 48.13 B - annual average 2009). For the expansion of spending three factories in Nakhon Ratchasima, Chon Buri and Samut Prakan. Of this amount, 130 million will flow B in the acquisition of new equipments. Another 130 million expected to be invested in B, the expansion of production facilities in India and Vietnam. Other industry companies such as Indorama Ventures Plc (IVL stretch) their probe even further to Europe and have in their investment activities mainly in Italy and the Netherlands in their sights.

The listed company Polypex (Thailand) Plc (PTL) uses contrast to the domestic market and has $ 22 million for a new production line output, which should start operating even during the year 2010th For the manufacturer of plastic films, this step is an important part of the overall strategy to continue to focus on products with higher added value. So far, simple films draw still responsible for around two thirds of the company\'s turnover. By 2012 this proportion to 50% will be reduced.

The biggest buyers of plastics in Thailand, according to the Institute PTIT (Petroleum Institute of Thailand), manufacturer of packaging, with a share of 49%, followed by electronics parts (12%), the motor vehicle industry (7%), construction at 6% and textiles, shoes, and the construction sector with 6%. Packages are expected in future especially in the wake of Thailand in order to gain more and more expansive use of ready meals in importance. As industry experts predict another trend seeing a greater focus on naturally degradable products such as bioplastics, where Thailand enjoys because of its natural resources is a huge potential.

From 24 27.6.10 to the fair was held in Thailand "Interplas 2010, which is regarded as the most important event for the industry in the Association of Southeast Asian Nations (ASEAN) - region. It found, according to the organizer 350 exhibitors from 15 countries and 35,000 visitors. The to 19 Edition of the fair was held at the International Exhibition Centre, Bangkok International Trade & Exhibition Centre (BITEC) in Bangkok, the next "Interplas is" on 23 scheduled to 26.6.11.(AH)

Source: www.plasticker.com

For More Information Please Visit Us At : Plastic Industry | Plastic Manufacturers | Plastic Exporters | Global Plastic Marketplace | Online Plastic B2B Portal | International Plastic Exhibition

Read more »

Plastics Exports are Developing Dynamically

The plastic processing plants in Malaysia, see their future in selling high-quality products, such as modern packaging materials and technical parts. This must be invested in new equipment, which is difficult given the tight financial situation. In addition to set higher prices for primary products and electricity in the industry. In production and exporters of plastics and synthetic resins characterized in 2010 from a recovery.

Malaysia\'s plastics industry includes over 1,450 manufacturers with 85,000 employees. The majority of the company is considered a small to medium, and many are owner-managed. Only just over half are found mainly in local hands. The industry posted 2009 sales of 14.6 billion ringgit (RM; about 3.0 billion euros, 1 euro = 4.91 RM - annual average 2009) and contributes approximately 3% of total turnover in the manufacturing sector. It is powered by an advanced petrochemical industry with raw materials.

During 2009 to cope with a decline of almost 10% was in 2010, the signs of growth. Especially for export, the outlook has been estimated by the Malaysian Plastics Manufacturers Association (MPMA) good. For the development of plastics demand at home and abroad are mainly due to the highly cyclical consumer electronics, automotive and construction industry. In particular, the first two had taken the difficult global recession. The major exports of films and packaging in the industrial countries had fallen to crisis.

Main features of the Malaysian plastics industry in billions of RM,% change year on year (Source: MPMA) *)

The industry is highly export-dependent. In the past decade, annual growth in exports 15-20% are recorded. The share of exports in the turnover increased from 40% in the late 90\'s to last nearly 60%. Despite the recovery in demand, particularly in the field of food packaging in the second Half of 2009 decreased exports of plastic products for the full year by 10.8% to 8.3 billion RM. These were imports valued at 5 billion to RM, which failed to 9.3% lower than last year. Primarily packaging materials were exported, for example, flexible films, sheets, bags, bottles and containers.

The main customers are the European Union, Japan and the PRC. Industry insiders expect the future especially from the Asian region a dynamic demand, the debt crisis in the EU could however provide for restraint. With the implementation of the Asean Free Trade Area (AFTA) will open up new markets for Malaysian plastics exporters in the participating countries, which in turn will also benefit from the reduction in import duties to zero since 1.1.10. In total, the MPMA greater opportunities than risks for the producers, even when the import pressure especially for synthetic resins should initially be high. A challenge for the producers themselves could develop prior to price increases for gas, which comes both as a fuel and as raw material for raw materials used.

The Malaysian factories made in 2009 about 37% of their goods in film extrusion and 35% with injection molding. The extrusion of pipes and profiles made 7% and 6% from the blow molding manufacturing. The main segments of the plastics industry are the manufacturers of packaging (40%), components for electrical / electronic industry (23%) and household goods (22%) and the automotive industry (9%). The rest of the production attributable to the construction industry and agriculture.

Growth opportunities are mainly seen in the field of packaging, including those with multi-layer material as well as in packaging for convenience foods and those that increase the shelf life of foods. The trend for weight saving in the automotive industry provides increasing demand for high-quality plastic parts. A growing challenge is setting new standards concerning environmental protection, safety and health, to be followed by the industry.

At a low level in the view of the MPMA the R & D and design efforts. To be able to develop, produce higher quality goods, and sell under its own brand, firms must also invest in their equipment. Only then will the long-term holdings are against competition from low wage countries. lacks some of the smaller family farms are often in capital and market experience to implement the modernization. Connoisseur of the industrial sector therefore see a need for consolidation in the local market - for example through mergers - as well as the need to cooperate with multinational companies.

The authorized investment volume in 2009 to 771 million at RM, but registered by the competent authority Malaysian Industrial Development Authority (MIDA) with 42 individual projects about a third less than last year. About 80% will flow into the packaging segment (production of flexible films, sheets and bags or blow-molded bottles and containers). The great majority of the investments it was new projects, foreign engagement standing for nearly 70% of the total.

The consumption of synthetic resins in 2009 fell by around 4% to 1.7 million tonnes, as the user industries are electronics and automotive less inquired. The production declined to 1.8 million tonnes, while exports were virtually unchanged at 0.8 million tonnes. A major problem for the industry are the rising prices of synthetic resin, according to the MPMA have these last four years more than doubled. The energy prices have risen, and further increases are expected. Main types of resins used in Malaysia are polyethylene, polypropylene, polyvinyl chloride and polystyrene. Engineering plastics such as polyamides and polycarbonates must however still largely imported.

The main producers of synthetic resins include BASF, Eastman Chemicals, Industrial Resins, Malayan Electro-Chemical Industry (MECI), Petlin Malaysia, Malaysia Petrochemicals, Polyethylene Malaysia, Malaysia Polypropylene, Titanium PP Polymers, Toray Plastics and Vinyl Chloride Malaysia. Usually it is a joint venture of international chemical companies, national oil and gas company Petronas.

Source: www.plasticker.com

For More Information Please Visit Us At : Plastic Industry | Plastic Manufacturers | Plastic Exporters | Global Plastic Marketplace | Online Plastic B2B Portal | International Plastic Exhibition

Read more »

Fake Eyelashes Made From Flies

Flylashes from Jessica Harrison on Vimeo.

Its not plastic or surgery, but it sure is fake! Jessica Harrison is an artist who created false eye lashes made from real fly legs. Now I have heard of tarantula but this really takes the cake.

I mean really, think about it, flies are known for landing their legs on some pretty nasty substances and places. Why would anyone want to put fly body parts near their eyes? It sounds like an infection waiting to happen.

Gross! But props to you Jess for the originality.

Read more »