Miami Thong Lift

We've all heard of the Brazilian bikini but Brazil isn't the only place where thongs are popular and tooshies are tight. A procedure becoming increasingly popular is known as the "Miami Thong Lift," and as its name implies, is popular in Miami, FL. The procedure was presented at the conference of British Aesthetic and Plastic Surgeons in London.

Rather than use silicone implants, grafts of fat liposuctioned from the thighs or stomach is purified and then injected into the layers of muscle of the buttocks, changing their shape. As with any procedure there are risks. While some doctors say the procedure can be done with a local anesthetic, and there is no risk of rejection since the fat belongs to the patient, once injected, the fat may not get adequate blood supply, die and be reabsorbed by the body. This could result in an uneven bum. The procedure is supposed to make the buttocks shapely and not necessarily larger. Before any surgical procedure it is important to consider all of the risks and long-term effects-- no butts about it! (I couldn't help myself).

Read more »

E! Introduces Bridalplasty, a New Reality Show

E! the company that produces Dr. 90210 Extreme Plastic Surgery who recently featured Dr. Jennifer Walden is about to embark on a new television series: Bridalplasty.

The new reality show will have brides-to-be compete in wedding-themed challenges (ranging from writing vow to planning honeymoons) to win surgeries their plastic surgery wish lists.

Winners will then under go the procedures immediately results will be shown at the beginning of the next week's episode.

"Viewers will witness his emotional and possibly shocked reaction as they stand at the altar and he lifts her veil to see her for the first time following her extreme plastic surgery," E! said.

Also, according to E! the women are voted out one by one by the other competitors and the last woman standing wins their dream wedding.

Read more »

New ASTM Standard Covers Society of the Plastic Industry's Resin Identification Code

W. CONSHOHOCKEN, Pa., -The Resin Identification Code (RIC) system is a means of sorting different types of plastics from household waste. The RIC was developed by the Society of the Plastics Industry in 1988. The RIC assigns a numeral from 1 to 7, with a "chasing arrows" symbol around the number, to a piece of plastic to indicate its type.

SPI recognized the importance of the involvement of the technical stakeholder community in updating and maintaining the RIC. In 2008, SPI approached ASTM about adopting the RIC system as an ASTM standard. RIC is now covered in a new ASTM International standard, ASTM D7611, Practice for Coding Plastic Manufactured Articles for Resin Identification. The new standard was developed by Subcommittee D20.95 on Recycled Plastics, part of ASTM International Committee D20 on Plastics.

"Since their beginnings in the mid-1800s, plastics have continued to evolve and new materials and applications have been developed to meet societal needs," said SPI President and CEO William Carteaux. "These innovations have continued since SPI developed the original Resin Identification Code more than 20 years ago and we fully support ASTM's work to involve more stakeholders and develop a new standard that modernizes the Code."

Thomas Pecorini, technology fellow, Eastman Chemical Co., and a D20 member, notes that while the RIC system was originally designed to assist sorters in waste recovery facilities, it has since taken on additional uses. "Scrap brokers use the RIC to trade materials," says Pecorini. "Municipalities use the RICs to tell their constituents which resins are acceptable for collection."

In addition to these uses, Pecorini notes that some states use the RIC system to charge fees for certain packaging products, and brand owners and retailers use the RIC when considering end-of-life options for packaging products.

Pecorini says that ASTM D7611 will be used by those who buy, sell and trade waste plastics that have completed their originally intended life. "It will be used by municipalities, waste collectors, scrap brokers, recyclers, brand owners, retailers and anyone else interested in understanding and directing the end of life of plastic materials."

# Now that ASTM D7611 has been published, D20.95 plans to consider the following questions for future revisions of the standard: Are the chasing arrows surrounding the numbers still appropriate?
# What are the more specific definitions that might be needed for each resin identification code?
# What are the criteria for adding new codes?

All parties interested in contributing to these discussions regarding potential revisions to ASTM D7611 are invited to join the task group responsible for the new standard, D20.95.01 (www.astm.org/JOIN). To purchase ASTM standards, visit www.astm.org and search by the standard designation number, or contact ASTM Customer Relations (phone: 610-832-9585; service@astm.org).

ASTM International is one of the largest international standards development and delivery systems in the world. ASTM International meets the World Trade Organization (WTO) principles for the development of international standards: coherence, consensus, development dimension, effectiveness, impartiality, openness, relevance and transparency. ASTM standards are accepted and used in research and development, product testing, quality systems and commercial transactions.

Source : ASTM International

Read more »

Kim Kardashian Talks Botox

Airing this past Sunday, Kim Kardashian under went Botox® treatments to her crowsfeet around her eyes on Keeping Up with the Kardashians. Kardashian who probably is no stranger to plastic surgery procedures had a mild meltdown about the bruising that occurred under her eyes from the product.

As a result of a flood of attention and emails from America, Kardashian released this statement on her blog:

“I’ve been getting lots of emails and comments regarding the botox episode of Keeping Up with the Kardashians so I wanted to address this today to clear some things up.

On the show you saw I had some bruising around my eyes after the procedure, which is totally natural, but because I hadn’t looked into the side effects, I freaked out. In no way was Dr. Kassabian a bad doctor… it wasn’t a botched job at all!!

I am not against botox, and I would never judge anyone else for getting any kind of surgical or non surgical procedure, but I think when you’re young there are other ways you can look after your skin, and some amazing products on the market, like Fusion Beauty’s Illumifill, that help keep you looking young and beautiful. Botox just wasn’t necessary for me at this age.”

Besides the obvious paid product placement, I feel Kardashian handled the matter well. She admitted she didn’t appropriately prepare and that she over-reacted.

My money still is on that shell go back for another syringe though!

Read more »

Kate Gosselin: Mommy of Eight to Sexy Mama

Since Kate Gosselin first appeared on "Jon and Kate Plus 8"a lot has changed; not just Gosselin's celebrity status but also her body. We have seen Gosselin go from "mommy of eight" to "sexy mama" after a tummy tuck and inception of a fitness regimen. However, many are beginning to speculate that Gosselin's new look may be the result of multiple procedures.

For starters, Gosselin appeared on the cover of People Magazine with a great figure and round, perky breasts. It is a known fact that most women lose some of their breast volume after having children. Breasts can begin to demonstrate pstosis or sagging, but not Gosselin's breasts! Though it cannot be confirmed, her breasts may look this good as a result of a breast augmentation and/or mastopexty or lift.

Additionally, rumors have circulated that Gosselin may be an avid fan of Botox, or have undergone liposuction of the submental area of the face (the area below the chin) as her face is taught and skin is smooth. Gosselin may have also undergone other surgical procedures. Our very own Dr. Jennifer Walden says, "Looking at recent photos of her in a bikini, she [Gosselin] may have had liposuction of her thighs as well. In addition, her chin is much more well-defined in recent photos which could be the result of submental liposuction and a chin implant." Whatever you're doing Kate, keep doing it! You look great!

Read more »

Baby's Back

How great was Jennifer Grey on Dancing With the Stars Monday night?! She moved Carrie Ann to tears with her debut performance proving that her ability to dance her way into our hearts was not left at Kellerman's. She looks fabulous at fifty, and hardly a day older than when she performed that infamous lift with the greatly missed Patrick Swayze. The most noticeable difference from then to now is not what you would expect after all this time (wrinkles, some sag, maybe a little weight gain) but rather a rhinoplasty that she had done not long after her Dirty Dancing days. Unlike nowadays when celebrities watch their careers soar after having good plastic surgery (all Ashley Simpson had on her resume pre-pretty nose was Seventh Heaven), Jennifer was deemed too unrecognizable after her appearance change and other than a short lived sitcom has rarely been seen on any screen, small or large. Well times have changed and America is thrilled to have Baby back and better than ever. She'll have my vote all season long and we promise not to put you in the corner again.

Read more »

SoftPedia: Doctors Doubt Kate Gosselin’s No Implants Comment

Wait, Kate! Doctors doubt Kate Gosselin’s no implants comment! Be sure to check out Softpedia to hear what Dr. Walden had to say on the matter!

Read more »

HollywoodLife.com: Did Pamela Anderson Reduce Her Breast Size?

It seems bigger may not always better when it comes to Pamela Anderson, who has industry insiders wondering if she had undergone a breast reduction.

Be sure to check out www.HollywoodLife.com to hear what Dr. Walden had to say on the matter!

Read more »

Ticona develops thermoformable Vectra LCP

Ticona Engineering Polymers has added a new member to its series of flame-resistant liquid crystal polymers. The company said the material is the first LCP tailored for thermoforming.


“With high melt viscosity and melt strength, this new LCP is ideally suited for extrusion and thermoforming processes,” said Edward Hallahan, marketing manager, high-performance polymers. “Initially, Ticona is offering a 40 percent mineral filled grade, Vectra Trex 541, which provides impact and notched impact strengths significantly higher than those of other mineral-filled grades.”

Vectra Trex 541 provides the following performance attributes, according to Ticona:

* High heat deflection temperature of 245°C;
* 20 percent improvement in impact performance versus standard 40 percent mineral-filled LCP;
* Higher melt viscosity – up to three times greater than standard 40 percent mineral-filled LCP.

Ticona developed Vectra Trex 541 for use by customers who extrude sheets and films that can be thermoformed to finished components. Suggested applications include:

* Medical – for use in sterilizable trays and equipment;
* Aerospace – meeting flame, smoke and toxicity requirements for use in aircraft interior applications;
* Semiconductor – providing high stiffness and a low coefficient of thermal expansion for use in chip carriers.

Vectra Trex 541 extends application possibilities for LCPs in the kitchenware and food industries, says Ticona. It can be vacuum-formed into large-format sheets or cooking pans capable of heating up and cooling down rapidly.

 According to the company, cookware made of LCP is an excellent alternative to baking pans and casseroles made of metal, “which are harder to clean, noisy and heavy.”

Ticona is a unit of Dallas-based Celanese Corp.

Read more »

Mold-Masters to release most new products in history at K 2010

Maximizing injection molding performance, minimizing business risk and reducing costs matter equally to Mold-Makers, Molders and End Users. K-Show 2010 presents the next opportunity for Mold-Masters to share with the world new products and services developed to continue facilitating achieving these critical business objectives.

Visitors to K-Show and Mold-Masters booth, #A39, located in hall 1, will get to experience firsthand how newest products of the industry’s leading Hot Runner technology company have redefined the concept of system optimization as it pertains to achieving our client’s business goals.

There is something new for Mold-Makers, Molders and End Users participating in medical, closures, consumer goods, personal care, automotive, teletronic, PET, or electronics markets at Mold-Masters K 2010 booth.

Highlights of new products to be introduced include:

1) M Series – Mold-Masters new global line of advanced temperature controller solutions. In 2009, Mold-Masters acquired UK based controller manufacturer PMS with a goal to create a new global controller group and platform with the most advanced and value delivering hot runner controller family of products available on the market.
M Series is the result offering users “Future Now Technology” that enables system functionality to expand with your changing requirements, Out-of Box convenience optimized for all major hot runner systems, and Plug & Play System Architecture that does not require any external service all. More compact, more intuitive and user friendly, more rugged and more value than any other product in the market today. No company supplies more Hot Runners Systems than Mold-Masters and no company knows more about the important role controller technology plays in the process.

2) Also on display will be the new E-Multi all electric, servo-motor driven, mold-mounted, fully mobile auxiliary injection units for multi-material or multi colored applications. E-Multi is the perfect solution for Molders who are looking to economically optimize their existing injection molding machine assets with an auxiliary injection unit solution that is highly mobile, compact and foot print neutral. Maximize injection molding performance, reduce costs and attack new markets in multi material application by leveraging the simplicity and precision of E-Multi.

3) Sprint VG – Engineered for speed, reliability and quality this all electric valve gate addition to the Sprint line of Caps & Closure solutions builds upon Sprint’s global reputation for providing the fastest color changes possible, the lowest energy consumption available and the highest part quality attainable all within a design created to minimize maintenance, maximize sustainable yield while reducing the total cost of associated ownership. Mold-Masters Sprint VG solution facilitates much faster cycle times than ever before witnessed with closure valve gate applications. The E-Drive system ensures exact pin position, on the fly adjustment of the pin position and equal movement of all valve pins via the servo driven synchro plate system to ensure the perfect balance is achieved between speed and quality. In short, Sprint VG is the new standard in cylindrical valve gating for fast cycling closure systems where speed, quality and uptime are key success factors.

4) Fusion G2 – For over 35 years the automotive industry has relied on Mold-Masters to provide next generation solutions that advance productivity, increase yield, reduce maintenance and push the industry standard. Fusion G2, with its drop in, connect and go technology is exactly what today’s automotive Mold-Makers, Molders and End Users have been demanding in a Hot Runner. A simple, reliable and easy to integrate plug and play solution is what Fusion G2 delivers. If you need all the above but also demand high value and speed to market in your next automotive hot runner solution then think Fusion G2.

PET molders, converters and end users will also not want to miss visiting with Mold-Masters at K-Show 2010. Since entering the industry a little over 2 years ago, Mold-Masters has experienced tremendous activity in its iPET Business Group. Using patented iCool conformal cooling technology and iFlow hot runner technology, iPET molds are defining a new standard for performance in the preform molding industry. For the K-Show 2010 PET visitors will see a series of firsts for the industry and we hope will end their visit with us convinced that when it comes to PET solutions Mold-Masters is the new global technology leader!

“At K 2010 Mold-Masters will launch these as well as several yet to be announced new market offerings. It is undoubtedly the most significant array of new solutions for our clients in our long history as we extend our offerings from hot runners into complementary products,” said Patrick Bennett, Executive Vice President Mold-Masters. “K-Show promises to be an exciting opportunity for the industry and we are looking forward to welcoming old friends and new customers to this technology showcase”.

Since the last K-Show the world has witnessed much upheaval and for many firms the landscape is now very different. The team at Mold-Masters throughout this period of great challenge never lost sight of what is most important, helping our clients achieve their most important business objectives. We, like our clients, faced the challenges and have emerged very strong and keen to continue helping our clients realize their goals. It is our passion and what makes us unique.


For More Details About Online Business and B2B Trade Portal Visit : Plastic Industry Updates | Plastic Business Offers | Plastic B2B Directory | Plastic Machinery Marketplace | Plastic Companies | Online Plastic Portal | Advanced E-Marketing | Plastic Exhibition  

Read more »

World Plastic Industry Information

Online Blog of Global Plastic Industry Business offers Plastic Market News, Plastic News, Polymer Updates, Plastic Articles, Plastic Industry Market Reports, Plastic Trade Leads, Plastic Trade Fairs, Plastic Events and world plastic industry resources supported by plastic-world.in.






For More Details About Online Business and B2B Trade Portal Visit : Plastic Industry Updates | Plastic Business Offers | Plastic B2B Directory | Plastic Machinery Marketplace | Plastic Companies | Online Plastic Portal | Advanced E-Marketing | Plastic Exhibition

You might also like

Read more »

Trade With Online B2B Marketplace

Plastic World is a B2B portal in India. Online plastic marketplaces have been redefining the Business to Business  industry in India. Plastic World is one such B2B trade portal, which has been relentlessly working its way up the ladder as the best product directory of India, with larger than normal number of Suppliers, Buyers, Exporters and Manufacturers. Suppliers and Buyers will find authentic and verified trade leads from all across the world, as well as India. Recently launched the B2B portal has proved enormously popular, and has established its image as a credible Business to Business Marketplace.

If you want to explore your business, expansion in the overseas market is very important. Geographical expansion extends the clientele and enables greater penetration into the markets. Therefore, maximum businesses are looking at exploring avenues for export and import of their products and services. One can consider various options from the list of importers and exporters for the best deal.


An area deserving particular mention is e-commerce, or in simple terms, online transaction. At the early stage, it did not work for the Indian market, but now India boasts of a strong line-up of B2B portals catering to SMEs. These portals contain the list of Indian importers and exporters. They have become instrumental in promoting Indian businesses on the global platform and in turn generating foreign revenues.


Business to Business (B2B) portal contains database of companies from India, US, UK and various other countries and tries to smoothen the trade between various countries. B2B portals act as a great platform for the business expansion and penetration in the market.

These B2B Guide also help us to buy and sell various goods and services. You can post selling trade leads there or look for buyers who have posted buying leads. You can find buyers and sellers of different products like apparel and accessories, automobiles and accessories, chemicals and plastics, plant and machinery, scientific instruments and other miscellaneous industries.

Therefore, a B2B trade portal becomes the best and most reliable source of business information present on the Internet. It ensures the best deal by providing the various options from the comprehensive list of importers and exporters.

For More Details About Online Business and B2B Trade Portal Visit : Plastic Industry Updates | Plastic Business Offers | Plastic B2B Directory | Plastic Machinery Marketplace | Plastic Companies | Online Plastic Portal | Advanced E-Marketing | Plastic Exhibition

Read more »